I have a 1/16" thick stainless steel lid with a 1 1/8" diameter hole, but I would like to make it a 1 1/4" diameter hole. Anybody have any ideas on where I could take it to make this happen? Machine shop or whatever?
Thanks.
1 1/4" hole in 1/16" thick stainless steel?
Moderator: Officers
- bike2brew
- Homebrewer
- Posts: 169
- Joined: Wed Feb 15, 2006 2:33 pm
- Location: 5 miles west of Free State Brewing Co.
1 1/4" hole in 1/16" thick stainless steel?
Support Independent Craft Breweries.
Let me look at my hole saws and see if i have the right one. Jarrell also has a set of unibits that would work too. How soon you need this done?
Just call me Andy!
Lupulin Threshold Shift
lupulin threshold shift \lu·pu·lin thresh·old shift\ n
1. When a once extraordinarily hoppy beer now seems pedestrian.
2. The phenomenon a person has when craving more bitterness in beer.
3. The long-term exposure to extremely hoppy beers; if excessive or prolonged, a habitual dependence on hops will occur.
4. When a "Double IPA" just is not enough
Lupulin Threshold Shift
lupulin threshold shift \lu·pu·lin thresh·old shift\ n
1. When a once extraordinarily hoppy beer now seems pedestrian.
2. The phenomenon a person has when craving more bitterness in beer.
3. The long-term exposure to extremely hoppy beers; if excessive or prolonged, a habitual dependence on hops will occur.
4. When a "Double IPA" just is not enough